DIN125 Flat Washer/DIN9021 Big Washer/OEM Washer

A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a screw or nut. Other uses are as a spacer, spring (belleville washer, wave washer), wear pad, preload indicating device, locking device, and to reduce vibration (rubber washer). Washers often have an outer diameter (OD) about twice their inner diameter (ID), but this can vary quite widely.
| Item | Black Steel Flat Washers |
| Grade | 100HV 200HV 300HV |
| Size | Dia:M3-M64,UNC:3/8”-2” L: all length available |
| Material | stainless steel304,316,carbon steel, alloy steel, brass… |
| Surface treatment | HDG, PTFE, plain, black, zinc plated, black, dacromet… |
| Packaging Details | bulk packing in cartons, then put on pallets, or as per your requests. |
| Customer design | our experienced engineer team can developed the products and manufacture in accordance with samples, drawings or only ideas |
| Payment terms | FOB, CIF, CFR, L/C, or others. |
| Delivery method | by sea, by air or by express service |
| Certifications | ISO9001 |
![1545986165525849.png `4)}6$(I][7%G){YDWN9R0O.png](https://zjchuhaistation.oss-accelerate.aliyuncs.com/geshan-new/uploadfiles/20181228/1545986165525849.png)
| 螺纹规格 | Φ8 | Φ10 | Φ10 | Φ10 | Φ12 | Φ12 | Φ12 | Φ14 | Φ14 | Φ14 | Φ16 | Φ16 | Φ16 | ||
| d | |||||||||||||||
| 类型 ① | R | N | W | R | N | R | W | W | R | N | W | N | R | ||
| d1 | 最大值 | 9.12 | 11.12 | 11.12 | 11.12 | 13.57 | 13.57 | 13.57 | 15.52 | 15.52 | 15.52 | 17.68 | 17.52 | 17.52 | |
| 最小值 | 8.9 | 10.85 | 10.85 | 10.85 | 13.3 | 13.3 | 13.3 | 15.25 | 15.25 | 15.25 | 17.25 | 17.25 | 17.25 | ||
| dc | 最大值 | 25.4 | 20 | 39 | 28 | 25.4 | 34 | 44 | 50 | 39 | 28 | 56 | 32 | 44 | |
| 最小值 | 24.88 | 19.48 | 38.38 | 27.48 | 24.88 | 33.38 | 43.38 | 49.38 | 38.38 | 27.48 | 54.8 | 31.38 | 43.38 | ||
| h | 最大值 | 2.3 | 2.3 | 3.5 | 2.8 | 2.8 | 3.5 | 3.5 | 4 | 3.5 | 2.8 | 4.6 | 3.5 | 4 | |
| 最小值 | 1.6 | 1.6 | 2.5 | 2 | 2 | 2.5 | 2.5 | 3 | 2.5 | 2 | 3.5 | 2.5 | 3 | ||
| 螺纹规格 | Φ20 | Φ20 | Φ20 | Φ24 | Φ24 | Φ24 | Φ30 | Φ30 | Φ30 | Φ36 | Φ36 | Φ36 | |||
| d | |||||||||||||||
| 类型 ① | N | W | R | R | N | W | R | N | W | R | N | W | |||
| d1 | 最大值 | 22.13 | 22.32 | 22.32 | 26.12 | 26.12 | 26.12 | 33.02 | 33.02 | 33.02 | 38.92 | 38.92 | 38.92 | ||
| 最小值 | 21.8 | 21.8 | 21.8 | 25.6 | 25.6 | 25.6 | 32.4 | 32.4 | 32.4 | 38.3 | 38.3 | 38.3 | |||
| dc | 最大值 | 39 | 66 | 50 | 56 | 44 | 72 | 72 | 56 | 90 | 90 | 66 | 110 | ||
| 最小值 | 38.38 | 64.8 | 49 | 54.8 | 43 | 70.8 | 70.8 | 54.8 | 88.6 | 88.6 | 64.8 | 108.6 | |||
| h | 最大值 | 4 | 5.1 | 4.6 | 5.1 | 4.6 | 5.6 | 5.6 | 5.1 | 6.4 | 6.4 | 5.6 | 8.5 | ||
| 最小值 | 3 | 4 | 3.5 | 4 | 3.5 | 4.5 | 4.5 | 4 | 5 | 5 | 4.5 | 7 | |||

















